Hoover Wet/Dry Vacuum cleaner If you have a problem, Problem Cleaner won’t run, Possible Solution

If you have a problem

If a minor problem occurs, it usually can be solved quite easily by using the checklist below.

Problem: Cleaner won’t run

Possible Cause

Possible Solution

•Not firmly plugged in.

•Plug cleaner in firmly

•No voltage in wall plug.

•Check fuse or breaker.

•Blown fuse/tripped breaker.

•Replace fuse/redet breaker.

Problem: Loss of suction or

air flow

•Possible Cause

•Possible Solution

•Obstruction in hose, wand or tool.

•Clear obstruction.

•Clogged cartridge or foam filter.

•Clean filter as described in “Maintenance” section.

•Hole/split in hose.

•Inspect and replace hose.

•Automatic shut-off engaged.

•See “Automatic wet shut-off” section

HOOVER y	® son marcas registradas		HOOVER et	® sont des marques déposées
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720			THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
	HOOVER and	® are registered trademarks
	THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
R1 4-98 S6530/45/50	Litho USA			56514-018