Cleaner description
184
The assembled cleaner will look like the drawing.
1.Handle
2.
3.
4.Hose
5.Tool cover
6.Powered hand tool
7.Final filter door
8.Handle release lever:
step on lever to lower handle to operating or low positions.
9.Edge groomers
10.Furniture guard: helps prevent cleaner from marking furniture.
11.Automatic brush roll indicator: shows when brush roll is rotating or stopped.
12.Brush roll control:
13.Carpet height control:
slide knob to correct setting for height of carpet being cleaned.
14.Headlight
15.‘Dirt FINDER’ display
16.Embedded ‘Dirt FINDER’ sensitivity switch
17.Check bag indicator
18.Bag door
19.Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release.
PO.Carrying handle
21.Wands
22.Dusting brush
23.Furniture nozzle
24.Crevice tool
Operate cleaner only at voltage specified on data plate on bottom of cleaner.
slide control to “Carpet” for cleaning with brush roll ON or to “Hard” for cleaning with brush roll OFF.
This cleaner is intended for household use.
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Self-propel feature
This feature allows you to control how quickly the cleaner moves.
Note: The
To move forward, push handle for- ward and guide cleaner away from you.
To move backward, gently pull handle back and guide the cleaner toward you,
Guide cleaner carefully at first until you have adjusted to the ease of operation.
For increased control in tight places
(e.g., around and under furniture, non- carpeted floors), slide the
Transporting cleaner
To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward.
Continued +
5
