Hoover WindTunnelTM Cleaner description, ON-OFF Switch, Self-propel feature, Transporting cleaner

2. How to use

Cleaner description

	2 - 1						The assembled cleaner will			14. Brush roll control:
							look like the drawing.			slide control to “Carpet”
				1			1.	Handle		for cleaning with brush
										roll ON or to “Hard”
				2			2.	Self-propel button		for cleaning with brush roll
							3.	ON-OFF switch		OFF.
				3
							4.	Hose		15.Carpet height control:
			5	6			5.	Furniture nozzle		slide knob to correct
		4			4		6.	Crevice tool		setting for height of
				7			7.	Dusting brush		carpet being cleaned.
							8.	Tool cover		16.Headlight
				8	23		9.	Final filter door		17.‘Dirt FINDER’display*
							10. Handle release lever:			18.Embedded Dirt FIND-
20				9	22			step on lever to lower		ERTM
								handle to operating or		sensitivity switch*
19
								low positions.		19. Check bag indicator*
					21	24	11. Edge groomers			20. Bag door
18				10			12. Furniture guard: helps			21.Cord hooks: wrap
17								prevent cleaner from		cord around hooks for
								marking furniture.		storage. The top hook
16							13. Automatic brush roll			can be rotated right or
								indicator*: shows when		left for easy cord
								brush roll is rotating or		release.
								stopped.		22.Carrying handle
				11						23. Hose rack
15		14								24. Wands
			13
				12						*some models only
	Operate cleaner only at voltage specified on data plate on						This cleaner is intended for household use.
	bottom of cleaner.
					2 - 3
2 - 2									2 - 4

A

ON-OFF Switch

Plug cord into electrical outlet.

To turn cleaner ON, push switch up.

To turn cleaner OFF, push switch down.

Note: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Self-propel feature

This feature allows you to control how quickly the cleaner moves.

Note: The self-propel feature oper- ates only when the cleaner switch and the self propel button are both ON.

To move forward, push handle for- ward and guide cleaner away from you.

To move backward, gently pull handle back and guide the cleaner toward you.

Guide cleaner carefully at first until you have adjusted to the ease of operation.

For increased control in tight places (e.g., around and under furniture, non- carpeted floors), slide the self-propel button to OFF to deactivate the feature.

Transporting cleaner

To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward.

Continued ➜

5