ASSEMBLY STEP 3
CONSOLE MAST
CONSOLE CABLE 
MAIN FRAME
Note: Be careful not to pinch any wires while attaching the console mast.
CRANK
PEDAL ARM
HARDWARE BAG 3 CONTENTS :
WAVY WASHER (L) | BOLT (M) | SPRING WASHER (B) | FLAT WASHER (K) |
22.5 mm | 20 mm | 15 mm | 20 mm |
Qty: 2 | Qty: 2 | Qty: 2 | Qty: 2 |
A | Open hardware bag 3. |
B | Carefully pull the console cable through |
| the console mast using the twist tie located |
| inside the console mast. |
C | Gently slide the console mast onto the |
| main frame and attach console mast to |
| main frame using |
D | Slide wavy washer (l) over crank |
| followed by pedal arm as shown. Rest |
| pedal arm wheel on guide rail. |
E | Attach the pedal arm to the crank using 1 |
| flat washer (k), 1 spring washer (b) |
GUIDE RAIL
WAVY WASHER (L)
FLAT WASHER (K)
SPRING WASHER (B)
and 1 bolt (M). |
PEDAL ARM WHEEL
BOLT (M)
F Repeat steps |
elliptical. |
12
