Horizon Fitness EX-78, EX-68 PRE Assembly, Tools Included, Parts Included, Unpacking, Need HELP?

TOOLS INCLUDED:

FF Screwdriver

FF 8 mm L-Wrench

FF 6 mm L-Wrench

FF 5 mm L-Wrench

FF 13/15 mm Flat Wrench

PARTS INCLUDED:

FF 1 Main Frame FF 1 Stabilizer Tube FF 1 Guide Rail Set FF 2 Pedal Arms

FF 2 Lower Handlebars

FF 2 Upper Handlebars

FF 2 Lower Link Arms With Footpads FF 1 Top Cap

FF 1 Top Cap Rear Cover

(EX-68, EX-78 and GS1040E only) FF 1 Console Mast

FF 1 Console Mast Boot FF 1 Console

FF 2 Handlebar Caps FF 1 Water Bottle Holder

FF 1 Rear Cover (EX-78 only) FF 1 Audio Adapter Cable FF 1 Power Cord

FF 7 Hardware Bags

PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level flat
	ALL
surface. It is recommended that you place a protective covering on your floor. Never
	MODELS
open box when it is on its side.

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

NEED HELP?

If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information is located on the back panel of this manual.

7