Horizon Fitness EX-77 manual S E M B LY Step

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY

10

A S S E M B LY STEP 3

CRANK

PRE-ATTACHED BOLT AND WASHERS

SCREW (F)

PEDAL ARM

PEDAL ARM COVER

A)Open HARDWARE BAG FOR STEP 3.

B)Remove PRE-ATTACHED BOLT & WASHERS from CRANK.

C)Slide PEDAL ARM onto CRANK and attach by re-inserting PRE-ATTACHED BOLT and WASHERS.

D)Repeat on the other side.

E)Attach the PEDAL ARM COVER to the right PEDAL ARM using 1 SCREW (F).

F)Repeat on the other side.

HARDWARE BAG FOR STEP 3 CONTENTS :

SCREW (F) 15 mm Qty: 2

A S S E M B LY STEP 4
MULTI-POSITION HANDGRIPS
CONSOLE MAST	BOLT (G)
PRE-ATTACHED BOLT AND WASHERS
	HANDLEBAR COVER
	RIGHT HANDLEBAR

A) Open HARDWARE BAG FOR STEP 4.

B)Attach the MULTI-POSITION HANDGRIPS to the right HANDLEBAR using 2 BOLTS (G).

C)Remove PRE-ATTACHED BOLT & WASHERS from CONSOLE MAST.

D)Slide RIGHT HANDLEBAR onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED BOLT & WASHERS.

	After handlebars are assembled they will rotate freely – be cautious. Until the
WARNING
	machine is fully assembled, do not grab the handlebars for support.

E)Snap HANDLEBAR COVERS together over the RIGHT HANDLEBAR. Note the position of the snap tabs on the covers before snapping into position.

F)Repeat on other side.

HARDWARE BAG FOR STEP 4 CONTENTS :

BOLT (G) 15 mm Qty: 4

11

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

EX-77_Rev.1.6.indd 10-11 7/1/08 8:17:43 AM