Maintenance And Service

FUEL CONVERSION:

TO BE INSTALLED BY A QUALIFIED SERVICE AGENCY ONLY

Please read and understand these instructions before installing.

Warning: This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or production of carbon monoxide may result causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper or complete until the operation of the converted appliance is checked as specified in the manufacturer’s instructions supplied with the kit.

Kit Parts List:

1 - Orifice (NG - #39 DMS or LP - #53 DMS)

1 - Pilot Injector (NG 0.62 mm; LP 0.35 mm)

1 - Installation instruction sheet

1 - Conversion label

Carefully inspect all parts supplied with this conversion kit. If any parts have been damaged or are missing, contact your dealer, distributor or courier company to have them replaced before starting this installation.

Conversion Kit Installation:

1.Turn control knob on the gas valve to the “OFF” position and shut the gas supply off at the shut-off valve upstream of the unit. CAUTION:

The gas supply must be shut off prior to

disconnecting the electrical power and

Rotate handles

 

 

before proceeding

with

the

conversion.

and remove the

 

Pilot assembly moved

Allow the valve and unit to cool down to

door and glass.

 

from firebox for clarity.

 

 

room temperature.

 

 

 

 

 

 

 

 

2. Remove

the

glass

as

shown

in

the

 

 

 

MAINTENANCE

AND SERVICE

-

GLASS

DOOR

 

 

 

REMOVAL.

 

 

 

 

 

 

 

 

 

 

3. Carefully remove the log set and ember

 

 

Lift off the pilot

material if they are installed.

 

 

 

 

 

head and replace

 

 

 

 

 

with proper pilot

4. Remove

the

burner as

shown

in

the

 

 

 

 

orifice for fuel type

MAINTENANCE AND SERVICE - BURNER REMOVAL.

 

 

to be used.

5. Convert the burner orifice(s):

 

 

 

 

 

 

a) Remove the main burner orifice with a

 

 

 

1⁄2 inch deep socket.

 

 

 

 

 

 

 

b) Put a bead of pipe-thread sealant or

 

 

 

approved

Teflon

tape

on

the

orifice

Using a 1⁄2" deep

 

Undo the two

threads before installing into the brass

 

(2) screws that

socket remove/reinstall

 

elbow.

 

 

 

 

 

 

 

the main burner orifice.

 

hold burner in

 

 

 

 

 

 

 

Venturi adjustment

the firebox.

c) Install the new orifice(s) from the kit

 

 

 

bracket.

 

into the brass elbow.

 

 

 

 

Figure 8: Unit burner shown apart.

 

 

 

 

 

 

 

 

11

Page 10 Page 12
Page 11
Image 11
Enviro 50-1033 owner manual Kit Parts List, Conversion Kit Installation
Page 10 Page 12

50-1033 specifications

The Enviro 50-1033 is an innovative, environmentally-friendly vehicle designed to meet the growing demand for sustainable transportation solutions. As a part of the advanced Enviro series, the 50-1033 stands out due to its blend of efficiency, performance, and eco-conscious features.

One of the defining characteristics of the Enviro 50-1033 is its low-emission engine technology. The vehicle is equipped with a state-of-the-art diesel engine that adheres to stringent emission standards, significantly reducing pollutants compared to traditional models. This feature not only lessens the environmental footprint but also contributes to improved air quality in urban settings.

Additionally, the Enviro 50-1033 incorporates advanced fuel efficiency technologies, making it an economical choice for fleet operators. With a focus on maximizing fuel economy without compromising performance, this vehicle is designed to deliver cost savings over its lifecycle. The engine employs a combination of turbocharging and high-pressure fuel injection systems, which enhances combustion efficiency and maximizes power output while minimizing fuel consumption.

The vehicle’s design is another noteworthy aspect. Built with lightweight materials and aerodynamics that reduce drag, the Enviro 50-1033 enhances overall performance and maneuverability. The spacious interior is designed to accommodate a larger number of passengers without sacrificing comfort. Ergonomically designed seating and high-quality materials create an inviting atmosphere for both drivers and passengers.

Safety features are a top priority in the Enviro 50-1033. The vehicle is equipped with advanced driver assistance systems, including anti-lock braking systems, traction control, and electronic stability control. These technologies work together to enhance vehicle safety, providing peace of mind for operators and passengers alike.

The Enviro 50-1033 also offers modular design options, allowing customization to meet the specific needs of various transportation services. Whether for public transport, private hire, or shuttle services, the flexibility of the Enviro 50-1033 ensures that it can adapt to diverse operational demands.

In conclusion, the Enviro 50-1033 is a remarkable vehicle that embodies the future of sustainable transportation. With its cutting-edge technologies, eco-friendly features, and commitment to safety and comfort, it represents a significant step forward in the quest for greener urban mobility solutions. As cities globally embrace the transition to cleaner transportation options, the Enviro 50-1033 is well-positioned to play a vital role in shaping the future of public transport.
Top Page Image Contents