INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
CONSOLE
GRIP PULSE
WATER BOTTLE HOLDER
CONSOLE MAST
TOP COVER
PIVOTING FOOT PAD 
PEDAL ARM
WHEEL COVER
REAR STABILIZER COVER
UPPER HANDLEBAR
HANDLE BAR COVER
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
ELBOW COVER
FRONT STABILIZER COVER
A S S E M B LY STEP 1
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) | SCREW (D) |
20 mm | 18 mm | 20 mm | Qty: 6 |
Qty: 2 | Qty: 2 | Qty: 2 |
|
MAIN FRAME |
FRONT STABILIZER COVERS |
SCREW (D) |
REAR STABILIZER COVER |
SCREW (D) |
FRONT STABILIZER TUBE |
BOLT (A) |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
TOOLS INCLUDED
c5mm Allen Wrench
c6mm Allen Wrench
cPhillips Screw Driver
c13/15mm Flat Wrench
PARTS INCLUDED
c | 1 | Console | c | 4 | Hardware Bags |
c | 1 | Console Mast | c | 2 | Elbow Cover Sets |
c1 Front Stabilizer Tube c 1 Rear Stabilizer Cover
c2 Upper Handlebars c 2 Front Stabilizer Covers
c2 Lower Handlebars c 2 Handle Bar Cover Sets
c 2 Lower Link Arms | c 1 Water Bottle Holder |
c2 Top Covers
c1 HORIZON FITNESS
12-Volt Power Adapter
| SPRING WASHER (B) |
REAR STABILIZER | FLAT WASHER (C) |
|
A)Open HARDWARE BAG FOR STEP 1.
B)Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT WASHERS (C).
C)Attach FRONT STABILIZER COVERS using 4 SCREWS (D).
D)Attach REAR STABILIZER COVER using 2 SCREWS (D).
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
LIMITED WARRANTY
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
LIMITED WARRANTY
LS_645E_Rev.1.7.indd
6/25/08 10:43:25 AM
