M A I N T E N A N C E

Cleanliness of your treadmill and its operation environment will keep maintenance problems and service calls to a minimum. For this reason, we recommend that the following preventive maintenance schedule be followed.

AFTER EACH USE (DAILY)

Clean and inspect, following these steps:

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use solvents, as they can cause damage to the treadmill.

Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.

Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.

Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage any other components on the treadmill by being misaligned.

EVERY WEEK

Clean underneath the treadmill, following these steps:

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Fold the treadmill into the upright position, making sure that the lock latch is secure.

Move the treadmill to a remote location.

Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.

Return the treadmill to its previous position.

EVERY MONTH - IMPORTANT!

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Inspect all assembly bolts of the machine for proper tightness.

Turn off the treadmill and wait 60 seconds.

Remove the motor cover. Wait until ALL LED lights turn off.

Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated. Failure to do so may result in premature failure of key electrical components.

EVERY 6 MONTHS OR 150 MILES

It is necessary to lubricate your treadmill running deck every six months

or 150 miles to maintain optimal performance of your treadmill. Once the L U B R I C AT I O N treadmill reaches 150 miles, the console will prompt you to lubricate the

treadmill. Only use lubricant provided by Horizon Fitness!

• Turn off the treadmill with the on/off switch, then unplug the

RUNNING BELT

power cord at the wall outlet.

 

Loosen both the rear roller bolts. (For best results, place two

removable marks on both sides of the frame and note roller position).

 

Once the belt is loosened, take the bottle of lubricant and apply it to

RUNNING DECK

the entire top surface of the running deck. Tighten both rear roller

 

bolts (matching up the marks for proper position) to original position.

 

After you have applied lubricant, plug in the power cord, insert the

 

safety key, start the treadmill and walk on the belt for two minutes to

 

spread the lubricant.

 

• Lubricate the air shocks with Teflon based spray.

 

Once lubrication is complete, reset the console by pressing and holding ‘STOP’ and Speed ‘+’ buttons for 5 seconds.

Please contact Horizon Fitness with questions about applying lubricant to your treadmill.

33

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

Page 33
Image 33
Horizon Fitness WT951 manual I N T E N a N C E, After Each USE Daily, Every Week

WT951 specifications

The Horizon Fitness WT951 is an impressive piece of fitness equipment designed for both home and commercial use, offering a blend of innovation, durability, and user-friendly features. This powerful rowing machine caters to users of all fitness levels, allowing individuals to engage in low-impact yet highly effective workouts that build strength and cardiovascular endurance.

One of the standout characteristics of the WT951 is its sturdy construction. Built with a robust aluminum frame, it ensures longevity while supporting various user weights and sizes. The design promotes a smooth rowing motion, resulting in a workout that feels both natural and efficient. The adjustable footrests with secure straps accommodate a range of foot sizes, allowing for personalized comfort during each session.

In terms of technology, the WT951 is equipped with a user-friendly console that features an easy-to-read LCD display. This display tracks essential workout metrics such as time, distance, calories burned, and strokes per minute, enabling users to monitor their progress effectively. Additionally, the console offers multiple preset workout programs, catering to those who desire structured routines and varied workout challenges.

Another innovative feature of the Horizon Fitness WT951 is the advanced resistance system it employs. With a combination of magnetic resistance and air resistance, users can experience a smooth and consistent rowing motion while easily adjusting the intensity level. This dual-resistance feature allows for tailored workouts, accommodating everything from leisurely sessions to high-intensity training.

The WT951 also boasts a compact design with a foldable frame, making it an ideal choice for those with limited space. When not in use, users can easily fold the machine and store it upright, fitting seamlessly into any home environment. The transport wheels further enhance its portability, enabling effortless movement and positioning.

With its sleek appearance and ergonomic design, the Horizon Fitness WT951 is more than just a rowing machine; it is an investment in one's fitness journey. Whether for rehabilitation, weight loss, or general fitness, this machine excels in delivering a full-body workout while being easy to operate. Overall, the WT951 stands out as a fantastic choice for anyone looking to enhance their fitness routine with a reliable, versatile, and technologically advanced rowing machine.