Hoshizaki AM-50BAE manual

Models: AM-50BAE

1 31
Download 31 pages 60.32 Kb
Page 4
Image 4
In the case of an AM-50 if a drain is not located in an area that will allow for the proper fall, there is an optional condensate pump available that can be installed directly into the unit. After removing the louvered rear panel the pump location is defined by the two metal tabs. This pump has a built in safety that will shut the AM-50 down in the event of a pump problem. This pump is available as an accessory through your local distributor. Simply follow the instructions included with the pump for details on the installation.

In the case of an AM-50 if a drain is not located in an area that will allow for the proper fall, there is an optional condensate pump available that can be installed directly into the unit. After removing the louvered rear panel the pump location is defined by the two metal tabs. This pump has a built in safety that will shut the AM-50 down in the event of a pump problem. This pump is available as an accessory through your local distributor. Simply follow the instructions included with the pump for details on the installation.

The AM-50 door can be field converted from the standard right hinged door to a left hinged door without the use of any additional hinge kits. The AM-100 and AM-150 use a spring loaded drop down door design therefore can not be reversed.

This procedure for reversing the AM-50 door is shown in the Instruction Manual provided with the unit. View this manual at www.hoshizaki.com.

- 4 -

Page 4
Image 4
Hoshizaki AM-50BAE manual