3. LOCATION
WARNING
This icemaker is not intended for outdoor use. Normal operating ambient temperature should be within +45°F to +100°F; Normal operating water temperature should be within +45°F to +90°F. Operation of the icemaker, for extended periods, outside of these normal temperature ranges may affect production capacity.
For best operating results:
•Icemaker should not be located next to ovens, grills or other high heat producing equipment.
•Location should provide a firm and level foundation for the equipment.
•Allow 6" clearance at rear, sides and top for proper air circulation and ease of maintenance and/or service should they be required.
4. SET UP
CAUTION
Before operating the icemaker, the Bin Control Assembly must be installed correctly.
1)Install the Bin Control Assembly as follows. See Figures 2 and 3.
(a)Remove the shipping tape securing the Bin Control Assembly. Remove the Assembly from the shipping hook by lifting it up and shifting to the right.
(b)Lower the Bin Control Assembly through the hole located at the bottom of the icemaker.
(c)Insert the Plug into the Receptacle on the Bin Control Assembly until it locks in place
(d)Secure the Assembly in place with the thumbscrew.
2)Level the icemaker/Storage Bin in both the
7
