2. HOW TO REMOVE PANELS - See Fig. 1
a)Front Panel...............Remove the screw (s). Lift up and toward you.
b)Top Panel................ Lift up at front slightly, push rearward, and lift off.
c)Side Panel (R)......... Remove the screw.
Slide forward slightly , and lift off.
d) Insulation Panel.......Remove thumbscrew, lift up | Fig. 1 |
slightly, and pull toward you. |
|
3. LOCATION
WARNING
This icemaker is not intended for outdoor use. Normal operating ambient temperature should be within +45°F to +100°F; Normal operating water tem- perature should be within +45°F to +90°F. Operation of the icemaker, for extended periods, outside of these normal temperature ranges may affect production capacity.
For best operating results:
•Icemaker should not be located next to ovens, grills or other high heat producing equipment.
•Location should provide a firm and level foundation for the equipment.
•Allow 6" clearance at rear, sides and top for proper air circulation and ease of maintenance and/or service should they be required.
15
