HotBrick Network Solutions
9. Select LAN & DHCP from the menu. You will see a screen like the example below.
Figure 2-3: LAN & DHCP
10. Ensure these settings are suitable for your LAN:
• The default settings are suitable for many situations.
• See the following table for details of each setting.
11. Save your data, then go to Step 2, Installing the VPN 800/2 Firewall Router in your LAN.
Settings – LAN & DHCP
LAN IP
Configuration IP address - for the VPN 800/2 Firewall Router, as seen from the local LAN.
Use the default value unless the address is already in use or your LAN is
using a different IP address range. In the latter case, enter an unused IP
Address from within the range used by your LAN.
Subnet Mask -The default value 255.255.255.0 is standard for small (class
"C") networks. For other networks, use the Subnet Mask for the LAN
segment to which the VPN 800/2 Firewall Router is attached (the same value
as the PCs on that LAN segment).
Page 10