As the colours of the wires in the lead may not

GB

correspond with the coloured markings identifyng

 

 

the terminals in your plug, proceed as follows:

 

Connect Green & Yellow wire to terminal marked￿ E

 

or

or coloured Green or Green & Yellow.

 

Connect Brown wire to terminal marked￿ L￿ or

 

coloured Red.

 

 

Connect Blue wire to terminal marked￿ N￿ or coloured

 

Black.

 

 

 

If a 13 amp plug (BS 1363) is used it must be fitted

 

with a

 

 

13 amp fuse, either in the plug or adaptor or at the

 

distribution board.

 

 

If you are in any doubt the electrical supply to your

 

machine, consult a qualified electrician before use.

 

How to connect an alternative plug:

 

The wires in this mains lead are coloured in

 

accordance with the following code:

 

B L U E

NEUTRAL (N)

 

B R O W N

LIVE (L)

 

GREEN & YELLOW

EARTH (E)

Disposing of the appliance:

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

GREEN &

YELLOW

BROWN

13 ampere fuse

 

BLUE

CROSS-BAR

 

CORD GRIP

Warning! The company denies all liability if and when these norms are not respected.

The first wash cycle

Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry, using the wash cycle 1.

!￿ The washing machine should not be installed in an outdoor environment, not even when the area is sheltered, because it may be very dangerous to leave it exposed to rain and thunderstorms.

!When the washing machine is installed, the mains socket must be within easy reach.

!Do not use extensions or multiple sockets.

!The power supply cable must never be bent or dangerously compressed.

!The power supply cable must only be replaced by an authorised serviceman.

"

Page 4
Image 4
Hotpoint BHWM149 manual First wash cycle, U E Neutral N O W N Live L Green & Yellow Earth E