Error Message | Possible Cause | Resolution |
|
|
|
Jam Document Transport Sensor 1
1.There is a sheet of paper blocking the first Document Transport Sensor (second sensor from the left).
2.The Document Transport Sensor 1 and/or its Reflector may be dirty.
3.The Side Guide may be adjusted too tight for the paper, cover stock, or tab stock.
1.Lift up the Document Transport Track Ball assembly and remove the paper.
2.Clean the Document Transport Sensor 1 and reflector, using Isopropyl alcohol and a clean, lint- free cloth. If the problem persists, call your GBC or Xerox Service Representative.
3.Ensure that the Side Guide is not too tight. Perform the adjustment in Chapter 2 (Setting the Side Guide). If the problem persists, call your GBC or Xerox Service Representative.
4.Press Stop/Reset 
button to clear error message. Follow printer jam clearance procedure and resume the job.
3
Figure 3-4: Punch-Generated Error Messages
Error Messages |
