Control Functions and Locations 1-7
1
nUse the Up and Down Arrows to scroll through the
listing of available languages. They are: English,
Spanish, German, French, Italian and Dutch.
nSelect a language and then press the Stop/Reset button.
d. Press the Diagnostics button again and the message, For
service menu enter keycode displays. This is the
Diagnostics function and is for use only by trained
service personnel.
CAUTION: The Diagnostics function is for use only by trained se rvice
personnel. Attempting to use diagnostics without proper training may res ult
in damage to the machine.
3Online/Offline
The Online/Offline button is used to change the operating
mode of the FusionPunch II. By pressing the Online/Offline
button once, the following flashing messages will appear on
the Upper row of the LCD Display Screen:
1. < Change Run Mode
2. ^ Change Punch Mode
3. > Change Destination
The LCD Display Screen will also display the current
configuration set up previously, or the default machine setup
in the Lower row as follows:
" Online / Punch / Stack 1"
"ONLINE/OFFLINE"