Xerox 16 Series manual Unlocking the Die Assembly

3Open the Sheet Eject Strap assembly, as shown in Figure 2-2.

4Release the Punch Arm retaining levers down and to the side, as shown in Figure 2-2.

Sheet Eject Strap

Assembly

Punch Arm

Retaining

LeversDie Lock

Knob

Figure 2-2: Unlocking the Die Assembly

5Unlock the Die: turn the Die Lock knob clockwise until a "click" is felt, as shown in Figure 2-2. Do not turn past that point or you will lock the Die again.

2-4 General Procedures