4Open (lift) the Input Guide Roller assembly, the Document Transport Ball Track assembly and the Sheet Eject Strap assembly, as shown in Figure 3-2 and clear any paper that may be jammed in that area.

Input Guide

Roller

Sheet Eject

Strap

Document

Output Guide

Transport Ball

Roller

Track

 

Figure 3-2: The Internal Paper Path Components

5Remove the Output Guide Roller assembly, as shown in Figure 3-2 and clear any paper that may be jammed in that area.

6Reinstall the Output Guide Roller assembly and ensure that all assemblies are locked down. Then, close the Top Covers.

7Open the Bypass Stacker Top Cover and clear any paper that might be jammed in that area.

8If the FusionPunch II is set up in Cycle Up mode, press the Stop/Reset button and the job will restart automatically.

9If the FusionPunch II is set up in Online mode, press the Stop/Reset

button to clear the error message and then press Start

.

3-4

Troubleshooting

Page 74
Image 74
Xerox 16 Series manual Internal Paper Path Components