Xerox 16 Series manual Glossary

Inline - same as "in series with", or directly behind another device. The FusionPunch II is inline with the printer and the Stacker, in turn, is inline with the FusionPunch II.

Misfeed - a condition that occurs when paper becomes folded or wrinkled and becomes stuck while feeding, thereby causing a paper jam.

Offline - when finishing devices are not being fed or controlled by the printer in a live production run. When the FusionPunch II and Stacker are being fed manually, they are in offline mode. Many setup and error recovery operations are done offline.

Offset Stacked - an automatic machine method of stacking documents in a staggered, side-to-side fashion so that each individual document (e.g., book or manual) is separated from the next.

One-Sided- a printing job that uses only one side of the paper, also called Single-Sided.

Online - the opposite of Offline; when the finishing devices are being fed and controlled automatically by the printer in a live production run.

Operator - the person responsible for the operation of the printer and finishing devices. The Operator starts production jobs and sees them through to completion.

Pressure Bar Release Levers - two levers that are used to lock or release the Pressure Bar, a machined steel bar located on top of the Die Set. You would remove the Die Set from the machine and release the Pressure bar to access and remove die pins, or change damaged pins.

G

Glossary G-5