Right Punch Door - the narrow door in the front of the Punch cabinet that, when opened, allows access to various adjustment knobs and to the Slug (punched paper chaff) Bin, which must be emptied periodically.
Setting the Backgauge - an adjustment procedure that is done to ensure that the margin between the leading edge of the paper and the punched holes is correct.
Setting the Side Guide - an adjustment procedure that is done to ensure that each sheet of paper maintains registration as it passes through the Die Set to be punched.
Sheet Eject Strap Assembly - an assembly consisting of a steel rail and three spring steel straps, that is used to tension the paper just before it enters the Die Set. The Sheet Eject Strap assembly is hinged and can be opened to clear paper jams.
Side Guide - a small, contoured paper guide made of sheet metal and located under the Sheet Eject Strap Assembly, to the right of the Infeed Guide. The Side Guide is adjustable and is used in Setting the Side Guide, described above.
Stacker - the finishing device that follows the FusionPunch II. The Stacker receives the punched output from the FusionPunch II and stacks it on an internal tray that will hold 2500 sheets of paper. When the Stacker Tray is full, the operator removes the stacked documents and generally transfers them to a separate area for offline binding.
G
Glossary |
