Xerox 16 Series manual Service

CAUTION: In case of emergency, use the power cord as a main disconnect device!

n

n

n

n

n

n

The FusionPunch II must be connected to a supply voltage corresponding to the electrical rating in the machine operating instructions (also listed on the serial number label).

The socket-outlet shall be located near the equipment and shall be easily accessible.

The grounding plug is a safety feature and will only fit into the proper grounding-type power outlet. If you are unable to insert the plug into an outlet, contact a qualified electrician to have a suitable outlet installed. Do not alter the plug on the end of the cordset (if provided) of the FusionPunch II. It was provided for your safety.

Unplug the FusionPunch II before moving the machine or whenever the machine is not in use for an extended period of time.

Do not operate the FusionPunch II if the machine has a damaged power supply cord or plug. Do not operate the machine after any malfunction, if liquid has been spilled into the machine, or if the machine has been damaged in any way.

Do not overload electrical outlets beyond their capacity. To do so can result in fire or electrical shock.

SERVICE

nDo not attempt to service your FusionPunch II yourself. Contact an authorized GBC service representative for any required repairs or major maintenance for your FusionPunch II.

DO NOT REMOVE THE MACHINE’S COVERS

nThere are NO user-serviceable parts inside the machine. Removal of the covers by the user could result in potential personal injury and/or property or machine damage.

FusionPunch II User Guide Preface vii