Installation

Important

It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. General

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.Ventilation

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Phillips C/SK Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

List of loose items:

4 x Phillips C/SK Head No. 6 x 25mm screws.

33

Page 32 Page 34
Page 33
Image 33
Hotpoint DY46 Mk2, BD32 Mk2, BD42 Mk2 manual List of loose items
Page 32 Page 34

BD32 Mk2, DY46 Mk2, BD42 Mk2 specifications

Hotpoint appliances are known for their reliability and innovative features, with models like the BD42 Mk2, DY46 Mk2, and BD32 Mk2 standing out in the marketplace. Each of these models is designed to cater to the demands of modern households, providing efficiency and functionality.

The Hotpoint BD42 Mk2 is a versatile fridge freezer that excels in organization and energy efficiency. It comes equipped with an impressive A+ energy rating, ensuring lower energy consumption without compromising on performance. Its spacious interior features adjustable shelves and dedicated compartments, allowing users to store groceries efficiently. One of its standout technologies is the "No Frost" feature, which prevents ice buildup, ensuring that users never have to defrost their freezer manually. The BD42 also includes an external water dispenser, providing chilled water on demand, a convenient addition for family gatherings and hot summer days.

The Hotpoint DY46 Mk2 is a dynamic washer dryer, merging advanced washing capabilities with drying efficiency. With a high spin speed and a variety of wash programs, the DY46 can handle large loads while maintaining fabric care. The model boasts a special "Anti-Allergy" cycle, designed to eliminate common allergens and bacteria, making it an excellent choice for households with sensitive skin. Additionally, its energy-efficient ratings save on utility bills. The washer dryer is also equipped with smart technology, allowing users to monitor and control their laundry from a smartphone app, an essential feature for busy lifestyles.

Finally, the Hotpoint BD32 Mk2 is a compact and efficient fridge freezer, perfect for smaller kitchens or apartments. It offers an A++ energy rating, making it one of the most energy-efficient models available. The design includes multiple shelves and storage compartments, maximizing space without compromising style. The BD32 features a modern LED lighting system, illuminating the interior and making it easier to find stored items. Its user-friendly controls and sleek finish make it an attractive addition to any kitchen.

In conclusion, the Hotpoint BD42 Mk2, DY46 Mk2, and BD32 Mk2 are exemplary models showcasing the brand's commitment to quality and innovation. Each model offers a blend of modern technology, energy efficiency, and user-friendly features, making them ideal choices for contemporary homes. Whether for refrigeration, laundry, or space-saving needs, these appliances fulfill a variety of household requirements impressively.
Top Page Image Contents