Manuals / Hotpoint / Kitchen Appliance / Dishwasher

Hotpoint FDUD 4812 manual Troubleshooting, Problem Possible causes / Solutions

Models: FDUD 4812

1 16
Download 16 pages 58.05 Kb
Page 14
Image 14

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance (see Assistance).

EN

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

cannot be controlled

approximately one minute and reset the program.

 

• The appliance has not been plugged in properly.

 

• The dishwasher door has not been shut properly.

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

dishwasher.

• The water inlet hose is bent (see Installation).

 

• The drain duct is blocked.

 

• The filter is clogged up with food residues.

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

noise.

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

covered in a white film or

hardness of the water (see Rinse aid and salt).

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

• The rinse aid has been used up or the dosage is too low.

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

streaked or have a bluish tinge.

 

 

 

The crockery has not been dried

• A wash cycle without a drying program has been selected.

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

 

salt).

 

• The rinse aid dispenser setting is not suitable.

 

• The crockery is made from non-stick material or plastic.

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

• The crockery has not been arranged well.

 

• The sprayer arms cannot move freely.

 

• The wash cycle is too gentle (see Wash cycles).

 

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

• The lid on the rinse aid compartment has not been shut correctly.

 

• The filter is dirty or blocked (see Care and maintenance).

 

• The refined salt level is low (see Rinse aid and salt).

 

 

The dishwasher does not take any

• There is no water in the mains supply.

water in - Tap shut-off alarm

• The water inlet hose is bent (see Installation).

(the ON/OFF indicator light flashes and

• Turn on the tap and the appliance will start after a few minutes.

the following message appears on the

• The appliance lock has been activated because no action was taken when the

display: No water. Open tap. After a

beeps sounded.

few seconds, A:6 will appear).

Switch off the appliance using the ON/OFF button, turn on the tap and switch

 

the appliance back on after 20 seconds by pressing the same button. Re-

 

program the appliance and restart the wash cycle.

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap

filter blocked

to eliminate the risk of flooding and remove the plug from the electrical socket.

(the ON/OFF indicator light flashes and

Make sure the water inlet filter has not become blocked by impurities (see “Care

the display shows A:7).

and maintenance” chapter).

 

 

14

Page 13 Page 15
Page 14
Image 14
Hotpoint FDUD 4812 manual Troubleshooting, Problem Possible causes / Solutions
Page 13 Page 15

FDUD 4812 specifications

The Hotpoint FDUD 4812 is a modern built-in dishwasher that combines innovative technology with user-friendly features, making it a compelling choice for households seeking efficiency and convenience in their kitchen. With its sleek design, this model seamlessly integrates into kitchen cabinetry, providing aesthetic appeal without compromising on performance.

One of the standout features of the Hotpoint FDUD 4812 is its impressive energy efficiency. Rated A+, this dishwasher consumes less energy per cycle, which not only reduces utility bills but also minimizes environmental impact. The model is designed to handle a variety of washing needs, featuring multiple washing programs that cater to different soil levels and types of dishes. From intensive cycles for heavily soiled pots and pans to quick washes for lightly soiled items, the FDUD 4812 is versatile enough for any occasion.

Another key attribute of this dishwasher is its accommodating capacity. With a 14-place setting, families can stack up dirty dishes without worrying about space constraints. The adjustable upper rack and foldable tines provide added flexibility, allowing users to configure the interior based on the items being washed, such as tall glasses or large baking trays.

The Hotpoint FDUD 4812 also boasts advanced cleaning technologies. The Active Care technology features a unique wash system that ensures optimal cleaning performance by maintaining water at the right temperature and pressure, effectively eliminating stubborn stains. Additionally, the model includes a dedicated zone wash option, which intensifies the washing power in either the upper or lower basket, enhancing the cleaning process for heavily soiled loads.

Quiet operation is another notable characteristic, with noise levels as low as 44 dB, making it a suitable option for open-plan living spaces or homes where quiet is desired. The delay start feature further enhances usability, allowing users to set the dishwasher to run at a more convenient time, such as during off-peak energy hours or overnight.

Safety features are also integrated into the Hotpoint FDUD 4812, including a child lock to prevent accidental operation and a water softener that helps reduce the effects of hard water on utensils, ensuring both longevity and cleanliness.

In conclusion, the Hotpoint FDUD 4812 is not just a dishwasher, but a reliable kitchen aid that blends efficiency, advanced technology, and thoughtful design. Its performance, energy efficiency, and user-centric features collectively make it an excellent choice for the modern kitchen.