Sharp FODC550 Troubleshooting the Machine, Select the correct original type for Original

TROUBLESHOOTING THE MACHINE

The following problems are related to the general operation of the machine and copying.

Problem	Cause and solution	Page
	The machine is not plugged into a
	power outlet.	-
	→ Plug the machine into a grounded outlet.
	Power switch OFF.	12
	→ Turn the power switch ON.
	The power save indicator is blinking.
	Indicates that the machine is warming
	up.	-
	→ Copies cannot be made until the
The machine does not	machine has finished warming up.
	The front cover or the side cover is not
operate.		-
	completely closed.
	→ Close the front cover or the side cover.
	The machine is in auto power shut-off
	mode.
	→ In auto power shut-off mode, all lights	13
	are off except the power save indicator.
	Press the [START] key ( ) to resume
	normal operation.

	The scan head locking switch is locked.		83
	→ Unlock the scan head locking switch.
	Select the correct original type for the
	original.
	→ Select AUTO with the [EXPOSURE]		24
	key or press the [ ] key ( ) or [	]
Copies are too dark or	key ( ) to manually select an
too light.	appropriate exposure.
	→ If the copy is too light or too dark even
	though AUTO was selected with the		65
	[EXPOSURE] key, adjust the automatic
	exposure level.
	The original is not placed face up in the
Blank copies.	RSPF or face down on the document
	glass.		20, 21

→Place the original face up in the RSPF or face down on the document glass.

8

71