Sharp FODC550 Loading paper in the bypass tray, Open the bypass tray and extend the tray

LOADING PAPER

Loading paper in the bypass tray

Note		• Paper must be fed narrow side first into the feed slot.
		• Special papers such as transparency film, labels, and envelopes
		must be fed one sheet at a time through the bypass tray.
		• When copying onto transparency film, remove each copy promptly.
		Do not let copies stack up.
1	Open the bypass tray and extend the tray.

To close the bypass

Note tray, perform step 1 and then step 2 in the illustration and push the round projections at the right of the tray until they click.

2 Set the bypass tray paper guides to the paper width. Insert the paper (print face down) all the way into the bypass tray.

Print face

3 Press the [TRAY SELECT] key () to select the bypass tray.

18