Sharp FODC550 operation manual Place the originals. p.21, If the memory becomes full

CONVENIENT COPY FUNCTIONS

Using the RSPF

1 Place the originals. (p.21)

Note	• If "SORT AUTO SELECT" is enabled in the user programs, the default output
	mode for copying from the RSPF is sort mode (p.65). In this case go directly
	to step 4. A checkmark " " will automatically appear in the display (p.11).

•If "SORT AUTO SELECT" is disabled, the default output mode will be non- sort mode. Follow the steps below to select sort mode.

2 Press the [E-SORT/SP.FUN] key until "SORT" appears and then press the [ENTER] key.

SPECIAL FUNCTION SORT

3 Press the [] key ( ) to move " " to the "ON" position and then the [ENTER] key.

SORT

ON OFF

4 Select the number of copies and any other settings, and then press the [START] key ( ).

The copies are delivered to the paper output tray.

Note	•	To cancel the sort copy job, press the [CLEAR] key ( ).
	•	To cancel sort copy mode, press the [CLEAR ALL] key ( ).

If the memory becomes full

•If the memory becomes full while scanning the originals, "MEMORY FULL, PRESS START TO RESUME" will appear in the display, and the machine will stop copying.

•To copy the originals that have been scanned up to that point, press the [START] key ().

•To clear the data that has been scanned into memory, press the [CLEAR ALL] key () or the [CLEAR] key ().

Offset function during sort copy

The offset function shifts the position of each set of copies in the paper output tray for easy separation.

The offset function can be changed with "OFFSET FUNCTION" in the user programs. (p.63)

1

2

3

1 1

1

2

3

1

Offset function When offset function is disabled

30