MAKING COPIES

 

 

Using the RSPF

Note

• Originals that are 5-1/2" x 8-1/2" to 8-1/2" x 14" and 14 lbs. to 24 lbs.

(52 g/m2 to 90 g/m2) can be used. A maximum of 30 pages can be

placed at once.

Straighten curled originals before placing them in the document feeder tray. Curled originals may cause misfeeds.

Place originals horizontally.

Before placing originals in the document feeder tray, be sure to remove any staples or paper clips from them.

When a copy is made, the edges will not be copied (image loss). For the image loss, see the "SPECIFICATIONS" (p.94).

When using the margin shift function, check the position of the margins carefully. (p.34)

1

2

Make sure that an original has not been left on the document

3

glass.

 

Adjust the original guides to the size

 

of the originals.

 

3 Set the original(s) face up in the

Original face up

document feeder tray.

 

The RSPF indicator on the operation panel

 

will light up. If this indicator does not light up,

 

the originals are not properly set or the RSPF

 

is not properly closed.

 

4 Select the number of copies and other copy settings, and then press the [START] key ( ).

Note

• The default output mode for copying from the RSPF is sort mode

(p.29), and a checkmark " " will automatically appear in the display

 

 

(p.11). If "SORT AUTO SELECT" is disabled in the user programs,

 

the default output mode will be non-sort mode. (p.65)

To stop copying in the middle of a run, press the [CLEAR] key ( ).

For the copy settings, see pages 23 through 25.

21

Page 23
Image 23
Sharp FODC550 Using the Rspf, Document feeder tray, Placed at once, Default output mode will be non-sort mode. p.65