Sharp FODC550 operation manual User Settings, User Programs, Copy mode

7

Chapter 7

USER SETTINGS

The user settings allow you to customize machine settings to better meet your needs.

USER PROGRAMS

The user settings consist of the following items.

To change a user program setting, see "SELECTING A SETTING FOR A USER PROGRAM" (p.67).

For the user programs in fax mode, see the Operation Manual (for Note facsimile).

Copy mode

Program		Setting codes
	Program name	(factory default		Explanation
number		setting appears
		in bold)
			•	Auto clear time automatically
		1: 10 SEC.		returns the copy settings to
				the initial settings (p.12) if no
		2: 30 SEC.		keys are pressed for a preset
1	AUTO CLEAR	3: 60 SEC.
				period of time following the
		4: 90 SEC.
				end of a copy job.
		5: 120 SEC.
		6: OFF	•	This program is used to select
				the period of time. Auto clear
				time can also be disabled.
			•	This function automatically
				switches the machine to a low
				power consumption state if
				the set duration of time
		1: 30 SEC.		elapses without the machine
				being used when the power is
		2: 1 MIN.
		3: 5 MIN.		on. The power save indicator
2	PREHEAT MODE	4: 30 MIN.		lights up, however, the keys
		5: 60 MIN.		on the operation panel can be
		6: 120 MIN.		used. Normal operation
		7: 240 MIN.
				automatically resumes when
				a key on the operation panel
				is pressed, an original is
				placed, a print/fax job is
				received.
3	AUTO SHUT-OFF	1: ON	•	Use this setting to enable or
				disable auto power shut-off
		2: OFF
				mode.

62