Misfeed in the transport area | Sharp FODC550 specs

TROUBLESHOOTING AND MAINTENANCE

2 Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area".

Warning

The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or other injury.

Caution

•Do not touch the surface (green portion) of the drum cartridge when removing the misfed paper. Doing so may cause damage the drum cartridge and smudges on copies.

•Do not remove the misfed paper from above the fusing unit. Unfixed toner on the paper may stain the paper transport area, resulting in smudges on copies.

3 Raise the fusing unit release lever and then close the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up.

C:Misfeed in the transport area

1Lower the fusing unit release lever.

See "B: Misfeed in the fusing area" (p.80).

2

3

Open the front cover.

To open the front cover, see "TD CARTRIDGE REPLACEMENT" (p.84).

	Rotate the roller rotating	Roller rotating
	knob in the direction of the	Roller rotating	8
	knob in the direction of the	knob
	arrow and gently remove the
	misfed paper from the exit
	area.

81

Image 83

Sharp FODC550 operation manual Misfeed in the transport area

Contents

FO-DC550 Checks Passports Drivers licenses For Your Records Contents Index User Programs Selecting a Setting for a User ProgramSpecifications Software License Material Safety Data Sheet 10cm 20cm Important points when selecting an installation siteDo not install your machine in areas that are Supply and Consumables Trademark acknowledgements USB 2.0 compatible Safety precautionsEnvironmental Information Conventions used in this manual and online manual Using the manualOnline Manual on the accessory CD-ROM Introduction Main Features Environment and people friendly design Fax function Laser printer functionColor scanner function Network connection option Part Names Preparations Operation panel Clear ALL key Copy Ratio keyPress to select an enlargement or reduction ratio Language setting Power on and OFFPower on Turn the power switch to the on position Auto power shut-off mode Power offPower save modes Preheat mode Paper Paper type Size Weight CapacityLoading Paper Or curled edges Follow these guidelines when using special papersLoading the Paper Tray Special papers Gently push the paper tray back into the machine Paper size, change the paper size setting as explainedChanging a Trays Paper Size Setting p.19 Envelopes Important points when inserting paper in the bypass trayBypass Feed including special paper Press the Tray Select key to select the bypass tray Loading paper in the bypass trayOpen the bypass tray and extend the tray Press the Menu key Changing a Trays Paper Size SettingFollow these steps to change a trays paper size setting Select the tray, and then press Copying books or originals with folds or creases Using the document glassMaking Copies Normal Copying Placed at once Using the RspfDefault output mode will be non-sort mode. p.65 Document feeder tray Paper output tray extension Stream feeding modeOriginals that cannot be used in the Rspf Capacity of paper output tray Press the numeric keys to set the number of copies Setting the number of copiesSelecting the Tray Press the Tray Select key Making a Copy Darker or Lighter REDUCTION/ENLARGEMENT/ZOOM Selecting a preset ratioFine adjustment of the ratio Use the key or the key for fine adjustment Rspf Convenient Copy FunctionsAutomatic TWO-SIDED Copying If you need to clear the data scanned into memory, press Clear key . When the Clear key is pressed,Number of copies setting is also cleared Press the Enter key Place the originals in the RSPF. p.21Press the Enter key Sort copy Sort CopySort appears and then press Copies of multiple original pages can be sorted into sets Offset function during sort copy Place the originals. p.21If the memory becomes full 1 copy Copying Multiple Originals Onto a Single Sheet of Paper Setting is also cleared 2IN1 appears and then press Place the originals. p.21 Press the E-SORT/SP.FUN key until Rspf AB Creating Margins When CopyingMargin shift Place the originals Press the E-SORT/SP.FUN key until To cancel margin shift mode, press the Clear ALL key Sharpdesk SET UP the SoftwareSoftware for FO-DC550 MFP driver MFP Driver Button Cable Operating system Before InstallationInstallation environment and usable software Hardware and software requirements Then install it using the new connection method Installing the SoftwareStandard Installation USB only Double-click the setup icon When the Finish screen appears, click the Close button SET UP the Software Windows XP USB/Parallel This completes the installation of the softwareInstall the USB 2.0 Composite Device Welcome window will appear. Click the Next button SET UP the Software Connect the USB/parallel cable p.55 Windows 98/Me/2000 USB SET UP the Software Windows 95/98/Me/NT 4.0/2000 Parallel Select LPT1 for the printer port Is connected to the same network Using the machine as a shared printerPerform steps 2 through 7 in Custom Installation p.40 p.41 Click the MFP Driver button You will return to the window of . Click the Close button That you are using and click the Next buttonPrinter port selection window, verify the network printer That is shared and whether the machine is to be used as Windows XP Setting UP Button Manager SET UP the Software Click view all Control Panel options Windows 98/Me/2000Select Sharp FO-DC550 and click the Properties button Select Sharp Button Manager F in Send to this application Connecting a USB cable Connecting the Machine to Your Computer Connecting a parallel cable User programs p.66 System requirements for USB 2.0 Hi-Speed modeFollowing system is required to use USB 2.0 Hi-Speed mode Make sure that paper is loaded in the tray Using the Printer ModeBasic Procedure for Printing Canceling a print job Scanning from the operation panel of the machine Using the Scanner ModeScanning Using the Keys on the Machine Modes Copying Printing Scanning Scanning from Your ComputerOperation in COPY, PRINTER, and Scanner Modes Button Manager scan menu Click to read the online manual HOW to USE the Online ManualInstalling Acrobat Reader Follow the on-screen instructions to install Acrobat Reader User Programs User SettingsCopy mode Pattern MIN 50% OFF300dpi HI-SPEED English NormalLOW American FULL-SPEED Print mode Press the Menu key and then press the Enter key Selecting a Setting for a User ProgramAppears. Adjust the exposure and press the Enter key AUTO/TEXT/PHOTO Auto Base settingsKey entry beep One beep Base setting beep Invalid key beep Display Messages Troubleshooting and MaintenanceIndication Cause and remedy Lamp indicator Display TD Cartridge Install a TDReplace Drum Too light Troubleshooting the MachineSelect the correct original type for Original Copies are too dark or Troubleshooting and Maintenance Paper misfeed Problem Cause and solution Misfeed occurPaper is outside of the specified Size and weight range Paper is not loaded properly Memory FULL, Press Start to Then set the paper size Click the start button and then click Control Panel Problems During Setup of the SoftwareMFP driver cannot be installed Windows 2000/XP Click Performance and Maintenance, and then click System Device Manager tab Plug and play screen does not appear USB onlyClick the icon beside Universal Serial Bus controllers Click the Ports tab Click System, click the Hardware tab, and click the DeviceManager button Click Icon beside Other Devices If you need to remove the software, follow these steps Setting of the other printer back to LPT1Removing the software Click Add or Remove Programs Misfeed in the paper feed area p.80 Misfeed Removal Misfeed in the paper feed area Misfeed in the fusing area Misfeed in the transport area Document feeder cover Misfeed in the Rspf LockUnlock Scan Head Locking Switch TD Cartridge Replacement Gently insert the TD cartridge until it Locks into place Gently pull the TD cartridgeOut while pressing the lock Release button While pushing the lock release button Troubleshooting and Maintenance Doing so may cause smudges on the copies Drum Cartridge ReplacementExternal light Press the key or key to display the count of each function Checking the Total Count Document glass and the back side of the Rspf Cleaning the MachineWipe the cabinet with a soft, clean cloth Cabinet Transfer charger Supply Part number Usable life About SuppliesTD cartridge and drum cartridge Supply list Sheet Paper Feed Unit AR-D16 System ConfigurationOptional Equipment Network Expansion KIT AR-NB2 N Parallel interface cable Using the AR-D16 with the printer functionInterface cable USB interface cable Appendix Specifications Power consumption Fusing systemResolution Power supply Interface Printer FunctionPrint speed Emulation Scanner Function Paper capacity Paper weightSheet paper feed unit AR-D16 Paper size Software License 100 Limited Warranty on Media Composition / Information on Ingredients 101Product and Company Identification 102 Stability and Reactivity 103Exposure Controls / Personal Protection Physical and Chemical Properties 104 105 106 107 108 Date Rivised Mar Date Issued Sep Msds No. F-31231 109 SymbolsIndex 110 111 112 Battery Disposal 2004E KS1 TINSE1323QSZZ FO-DC550