Sharp FODC550 operation manual Loading the Paper Tray, Special papers, Or curled edges

LOADING PAPER

Special papers

Follow these guidelines when using special papers.

●Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or printing).

●There are many varieties of special paper available on the market, and some cannot be used with this machine. Before using special paper,

contact your SHARP authorized dealer.

● Before using other than SHARP recommended paper, make a test copy to 2 see if the paper is suitable.

LOADING THE PAPER TRAY

Note	Make sure that the paper is not torn, is free of dust, and has no wrinkles
	or curled edges.

1 Raise the handle of the paper tray and pull the paper tray out until it stops.

2 Push the pressure plate down until it locks in place.

Push the center of the pressure plate down until it locks into place.

15