Sharp FODC550 Reduction/Enlargement/Zoom, Selecting a preset ratio, Fine adjustment of the ratio

REDUCTION/ENLARGEMENT/ZOOM

Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can be pressed to quickly select a ratio from among eight preset ratios. In addition, the [ ] key ( ) and [] key ( ) can be pressed to select the ratio in increments of 1%.

1	Place the original(s) and check the paper size.
2
	Press the [COPY RATIO] key.	COPY RATIO

- 100% +

3

3 Press the [COPY RATIO] key and/or [] key ( ) or [] key ( ) to select the desired copy ratio and then press the [ENTER] key.

Selecting a preset ratio

The preset ratios change as follows each time the [COPY RATIO] key is pressed:

"100%" → "78%" → "64%" → "50%" → "25%" → "400%" → "200%" → "129%".

8.5x14 TO 8.5x11 - 78% +

Fine adjustment of the ratio

The ratio can be adjusted from 25% to 400% in increments of 1%. (When the RSPF is being used, the zoom copy ratio range is 50% to 200%.)

Use the [] key ( ) or the [] key ( ) for fine adjustment.

ZOOM

- 99% +

• To return the ratio to 100%, press the [COPY RATIO] key until 100%

Note appears.

•Press the [COPY RATIO] key to set the approximate ratio, then press the [] key ( ) or [] key ( ).

•To decrease or increase the zoom ratio rapidly, hold down the [] key ( ) or [] key ( ).

The ratio will stop changing at each of the preset ratios. To continue changing the ratio, release the key and then hold it down again.

4 Select the number of copies and any other copy settings, and then press the [START] key ( ).

The copy will be delivered to the paper output tray.

25