Sharp FODC550 operation manual Min, Pattern

					USER SETTINGS
Program		Setting codes
	Program name	(factory default			Explanation
number		setting appears
		in bold)
			•	This function automatically
				switches the machine to a state
				that consumes even less power
				than preheat mode if the set
				duration of time elapses without
				the machine being used when
		1: 5 MIN.		the power is on. All lights
				except the power save indicator
	AUTO SHUT-OFF	2: 30 MIN.		go off. To resume normal
4		3: 60 MIN.
	TIME			operation, press the [START]
		4: 120 MIN.
				key (	). Normal operation
		5: 240 MIN.
				also resumes automatically
				when a print/fax job is received
				or scanning is begun from a
				computer. While in auto power
				shut-off mode, no keys (except
				the [START] key (		)) can be
				used.
			•	When copying using the
				RSPF, while "SET ORIGINALS
				FOR STREAM FEEDING."
5	STREAM FEEDING	1: ON		appears in the display after an
				original has been scanned
		2: OFF
				(about 5 seconds), a
				subsequent original can be
				placed and automatically fed
				into the machine.
			•	Use this setting to select the
				layout pattern when two
6	LAYOUT IN 2IN1	1: PATTERN 1		original pages are copied onto
		2: PATTERN 2		a single sheet of paper (see
				page 31 for the layout
				patterns).
			•	When enabled, this function
7	OFFSET	1: ON		offsets the position of each
				set of copies in the output tray
	FUNCTION	2: OFF
				in copy mode, and each print
				job in printer mode.

7

63