Sharp FODC550 operation manual Place the originals in the RSPF. p.21, Press the Enter key

CONVENIENT COPY FUNCTIONS

Using the RSPF

1 Place the original(s) in the RSPF. (p.21)

If you place an odd number of originals for one-sided to two-sided copying, the last page will be one-sided.

2 Press the [2-SIDED COPY] key and select the two-sided copy mode that you wish to use.

The mode changes as follows each time you press the [2-SIDED COPY] key: "1 TO 1", "1 TO 2", "2 TO 2", "2 TO 1"

•Two-sided copies from one-sided originals: "1 TO 2"

•Two-sided copies from two-sided originals: "2 TO 2"

•One-sided copies from two-sided originals: "2 TO 1"

2-SIDED COPY

2 TO 1

3 Press the [ENTER] key.

If you selected "1 TO 2" in step 2, select "LONG EDGE" or "SHORT EDGE" and press the [ENTER] key. LONG EDGE and SHORT EDGE are shown in the illustration on page 26.

4 If you selected "2 TO 1" or "2 TO 2", press the [] key ( ) or [] key ( ) to select the original size and then press the [ENTER] key.

The following original sizes can be selected: "8.5x14", "8.5x13", "8.5x11", "5.5x8.5", "A4", "B5", "A5".

ORIG. SIZE ENTER 5.5x8.5

5 Select the number of copies and any other settings, and then press the [START] key ( ).

The copy will be delivered to the paper output tray.

Note	• To cancel automatic two-sided copying, press the [CLEAR ALL] key
	( ) or press the [2-SIDED COPY] key, select the "1 TO 1", and then
	press the [ENTER] key.

•Do not touch the reversing tray while automatic two-sided copying is in progress.

28