Sharp FODC550 operation manual Select LPT1 for the printer port

SET UP THE SOFTWARE

5 When you are asked how the printer is connected, select "Connected to this computer" and click the "Next" button.

If you are using the machine as a shared printer on a network, select "Connected via the network". For more information on this setting, see "Using the machine as a shared printer" (p.48).

6 When the interface selection screen appears, select "Parallel" and click the "Next" button.

5

7 Select the printer port and whether the machine is to be used as the default printer, make the selections and click the "Next" button.

Select "LPT1" for the printer port.

Note	• If "LPT1" does not appear, another printer or peripheral device is
	using LPT1. In this case continue the installation, and after the
	installation is finished, change the port setting so that the machine
	can use LPT1. This procedure is explained in "Another printer is
	using the parallel port (when using a parallel cable)" on page 77.

•The "Add Network port" button is used when the machine is used as a shared printer. (p.48) Do not click this button here.

47