Sharp FODC550 operation manual Troubleshooting and Maintenance, Display Messages

8

Chapter 8

TROUBLESHOOTING AND MAINTENANCE

Problems related to general use of the machine, the copy function, and software setup are explained here. Be sure to check the problem carefully before calling for service, as many problems can be solved by the user.

If you are unable to solve the problem, turn off the main switch, unplug the power cord from the outlet, and contact your SHARP authorized dealer.

Note	For problems related to the fax, printer and scanner functions, see the
	corresponding operation manuals.

DISPLAY MESSAGES

When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the indicated page.

Note		Be sure to use only genuine SHARP parts and supplies.
		Indication		Cause and remedy	Page
Lamp indicator			Display
			BYPASS : ADD
Tray			PAPER	The indicated paper tray is not closed,
			TRAY<*> : ADD
location	Blinks			is closed incorrectly, or has run out of	15
			PAPER
indicator				paper. (The tray is indicated in <*>.)
			CLOSE PAPER
			TRAY<*>
			CLEAR PAPER	A paper misfeed has occurred.
			JAM.	Remove the misfeed as explained in	79
			SPF/RSPF JAM.	"MISFEED REMOVAL".
			FRONT OR SIDE
			COVER OPEN.	The cover is open. Close the cover.	-
			CLOSE COVERS.
			CLOSE THE SPF/	The RSPF cover is open. Close the RSPF	82
			RSPF COVER.	cover.
			REPLACE THE TD	The TD cartridge is empty. Replace the	84
Error						8
	Blinks		CARTRIDGE.	TD cartridge with a new cartridge.
indicator
				When [L1-00] appears, the scan head
				locking switch is locked. Turn off the	83
				power, release the scan head locking
			SYSTEM ERROR	switch, and turn the power back on.
				The machine will not function. Turn the
			[XX - XX] REFER	power switch off, wait about 10 seconds,
			TO USER GUIDE
				and then turn on the switch again. If this	-
				does not clear the error, remove the
				power cord from the outlet, and contact
				your SHARP authorized dealer.

69