Care and Cleaning

Before cleaning or performing maintenance on your appliance, disconnect it from the electrical power supply.

To extend the life of the cooktop, it is absolutely indispensable that it be cleaned carefully and thoroughly on a frequent basis, keeping in mind the following:

•Do not use steam equipment to clean the appliance.

•The enameled parts and the glass top, if present, must be washed with warm water without using abrasive powders or corrosive substances which could ruin them;

•The removable parts of the burners should be washed frequently with warm water and soap, making sure to remove caked-on substances;

•On cooktops with automatic ignition, the end of the electronic ignition device must be cleaned carefully and frequently, making sure that the gas holes are not clogged;

•The electric hobs should be cleaned using a damp cloth

and then rubbed with oil while still warm;

•Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents (containing phosphorous) for an extended period of time. It is recommended that these parts be rinsed thoroughly with water and then dried well. It is also a good idea to clean up any spills.

Greasing theTaps

The taps may jam in time or they may become difficult to turn. If so, the tap itself must be replaced.

N.B.:This operation must be performed by a technician authorised by the manufacturer.

Troubleshooting

Before calling service for assistance, check through the following list, there may be nothing wrong.

First of all, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open.

If the burner does not light or the flame is not uniform around the burner.

Check to make sure that:

•The gas holes on the burner are not clogged.

•All of the movable parts that make up the burner are mounted correctly.

•There are no draughts around the cooking surface.

If the flame does not stay lit on a model with the Flame Failure device.

Check to make sure that:

•You press the knob all the way in.

•You keep the knob pressed in long enough to activate the flame failure device.

•The gas holes are not clogged in the area corresponding to the flame failure device.

If the burner does not remain on when set to "Low". Check to make sure that:

•The gas holes are not clogged.

•There are no draughts near the cooking surface.

•The minimum has been adjusted correctly (see Installation section, "Minimum Regulation").

If the cookware is not stable.

Check to make sure that:

•The bottom of the cookware is perfectly flat.

•The cookware is centered correctly on the burner .

•The support grids have not been inverted.

If, despite all of these checks, the hob does not function properly and problem persists, call Hotpoint Service (see KEY CONTACTS, back page), informing them of:

-The type of problem.

-The abbreviation used to identify the model (Mod. ...) as indicated on the warranty.

IMPORTANT:

Never call upon technicians not authorized by the manufacturer, and refuse to accept spare parts that are not original.

7

Page 6 Page 8
Page 7
Image 7
Hotpoint GF640, GF641 manual Care and Cleaning, Troubleshooting, Greasing theTaps, If the cookware is not stable
Page 6 Page 8

GF640, GF641 specifications

The Hotpoint GF641 and GF640 are modern gas cookers designed to cater to the needs of today’s busy kitchens, combining efficiency with user-friendly features. These models embody Hotpoint's commitment to quality and innovation, ensuring that users experience both convenience and culinary excellence in their cooking endeavors.

One of the standout features of the Hotpoint GF641 is its four gas burners, which come in varying sizes to accommodate different cooking tasks. This allows for versatile meal preparation, whether simmering, boiling, or frying. The burners are designed with high-efficiency technology, ensuring optimal heat distribution for consistently excellent results. With precise temperature control, users can cook with confidence, knowing that their dishes will be prepared to perfection.

The GF640 offers similar advantages, featuring a robust stainless steel hob that not only enhances the aesthetic appeal of any kitchen but also provides durability and ease of cleaning. The clean lines and sleek design make it a great addition to both contemporary and traditional interiors, while the removable burner caps enhance maintenance efficiency.

Both models are equipped with an integrated grill, allowing for a range of cooking options from roasting meats to melting cheese on top of dishes. The grill's adjustable height ensures that users can achieve the perfect finish on their meals, making it ideal for both quick snacks and elaborate dinners.

Safety is a priority in the design of the GF641 and GF640. They come with flame failure devices that automatically cut off the gas supply if a flame goes out, providing peace of mind during cooking. Additionally, the ovens in both models feature an easy-to-read gas oven thermometer, enabling precise cooking and baking outcomes.

The functionality of the Hotpoint GF641 and GF640 is further enhanced by their energy-efficient ratings, helping users save on energy bills while reducing their environmental footprint. With user-friendly ignition, these cookers ensure a hassle-free start to every cooking session.

In conclusion, the Hotpoint GF641 and GF640 offer an impressive combination of features, technologies, and characteristics that make them an excellent choice for anyone looking to upgrade their kitchen appliances. Their thoughtful design, safety features, and versatile cooking options provide an ideal platform for culinary creativity. Whether you are a novice cook or an experienced chef, these cookers promise to deliver reliable performance and exceptional results every time.
Top Page Image Contents