Hotpoint HDA2600K warranty STEP Select an option, Stirt the dishwasher, Systems Monitor

.

DOOR LATCH	TIME	ENERGY	CYCLE PHASE
“OFF” POSITION	TO END	MONITOR
I	OF CYCLE	I	I

1~~

STEP 5

Select an option

●HEATED DRYING provides faster drying. Can be changed while cycle is running.

●ENERGY SAVER shuts off drying heater. Dishes air-dry naturally. It takes longer, but saves energy. You can prop door open about 3 inches after motor stops to speed drying. Excellent for overnight drying.

●SANI ON-OFF. Select with either POTS & PANS or NORMAL WASH. Heats water in final rinse to 140 Q145°F. Touch pad once for ON, once more for OFF. This option may be changed at any time before or after start of cycle.

STEP6

Stirt the dishwasher.

●When you’re ready to wash dishes, touch the START pad. Dishwasher will proceed through your entire program and turn off automatically.

To delay the stirt, touch DELAY START pad. The SYSTEMS MONI~R will read “1 hrs delay:’ Touch pad once again for each hour desired up to 9 hours. The machine will count down and start automatically at the correct time. Note: Don’t forget to put detergent in cup and close cup. Do not use DELAY START with the RINSE & HOLD cycle.

To change a cvcle after washing stirts, t;uch tie CLEAR/RESE~ pad to cancel cycle. After water is pumped out and motor stops, you can reprogram and restart the dishwasher.

Systems Monitor

This panel tells you what is happening in the dishwasher and can alert you to some possible problems.

Information displayed:

c Selected wash cycle

●Selected dry option

c Minutes to end of cycle

●Cycle phase, such as WASHING, RINSING or DRYING

●Diagnostic codes to alert you to possible problems

. Relative energy used by each cycle. Lets you choose the cycle you need that uses the least energy.

See pages 7-10 for explanation of displays and codes.

5