How to operate the dkhwasher
SELECTED CYCLE INDICATOR LIGHTS
STEP 1
I
Load your dishwasher with dishes, silverware, pots, pans, bowls, etc. according to instructions on pages 14 through 16.
STEP 2
Add detergent to the detergent dispenser.
Use rinse aid agent to help prevent spotting. (See page 12.)
Close and latch dishwasher door.
L//f
STEP 3/ Select desired wash cycle
Touch the center of the pad.
c Pm & PANS is for items such as pots, pans and casseroles. Everyday dishes may be included,
. NORMAL WASH is for loads of everyday dishes with medium soils. Designed to yield high performance on normal loads.
c SHORT WASH is for most loads of everyday dishes with light soils or soils that have not dried on. It saves hot water over the higher performance cycles, thus saving energy.
●
●RINSE & HOLD is for rinsing partial loads which will be washed later. Do not use detergent. Do not use DELAY STA~ with this cycle.
To change a setting, just touch desired pad.
Your dishwasher is now automatically programmed including a Soil Level Selection. Cycle Indicator Lights tell you the complete program.
And a number in the SYSTEMS MONI~R (at right) will tell you how long the cycle will take. If you’re satisfied, just touch the START pad.
STEP 4 ‘
Select a soil level
If you wish to make program changes, start with the soil level. You should select a change within 30 seconds, otherwise all panel lights will go out. To relight, touch any pad or open and
●MEDIUM SOIL is automatically programmed when a cycle is selected. You may want to change the selection depending on the soil on your dishes.
●HEAVY SOIL should be selected when dishes are extra soiled or extra greasy. This gives dishes an extra rinse in every cycle except RINSE & HOLD. This lengthens cycle.
●LIGHT SOIL will save time and money if you
RINSE & HOLD.
4
