Operation of wireless remote control

Name and function of wireless remote control

Note:

Besure that there are no obstructions between receiver and remote controller; Don't drop or throw the remote control; Don't let any liquid in the remote control and put the remote control directly under the sunlight or any place where is very hot.

Signal transmitter

Remote control

ON/OFF

ON/OFF button

●Press this button, the unit will be turned on, press it once more, the unit will be turned off. Sleep function will be canceled, while unit off.

MODE

MODE button

●Press this button, Auto, Cool,Dry, Fan, Heat mode can be selected circularly. Auto mode is default while power on. Under Auto mode,the temperature will not be displayed; Under Heat mode, the initial value is 28℃(82 oF);Under other modes, the initial value is 25℃(77 oF).

AUTO

COOL

DRY

FAN

HEAT

(only for cooling and heating unit)

SLEEP

SLEEP button

●Press this button, Sleep On and Sleep Off can be selected. After powered on,Sleep Off is defaulted. After the unit is turned off, the Sleep function is canceled. After Sleep function set up, the signal of Sleep

will display. In this mode, the time of timer can be adjusted. Under Fan and Auto modes, this function is not available.

FAN

FAN button

●Press this button, Auto, Low, Middle, High speed can be circularly selected. After powered on,Auto fan speed is default.

Under Blow mode, Low fan speed only can be set up.

Low fan

Middle fan

High fan

CLOCK

CLOCK button

●Press this button, the clock can be set up, signal blink and display.Within 5 seconds, the value can be adjusted by pressing + or - button, if continuously press this button for 2 seconds above, in every 0.5 seconds, the value on ten place of Minute will be increased 1. During blinking, repress the Clock button or Confirm button,

signal will be constantly displayed and it denotes the setting succeeded. After powered on, 12:00 is defaulted to display

and signalwill be displayed. If there is signal be displayed that denotes the current time value is Clock value, otherwise is Timer value.

8