Hotpoint HP21WC, HP21WR ★About AUTO RUN, ★About lock

Guide for operation- general operation

1.	After powered	on, press ON/OFF button, the unit will start to run.(Note: When
	it is powered	off, the guide louver of main unit will close automatically.)
2.	Press MODE button, select desired running mode, or press COOL or HEAT
	mode to enter into the corresponding operation directly.
3.	Pressing + or	- button, to set the desired temperature (It is unnecessary

to set the temp. at AUTO mode.)

4.Pressing FAN button, set fan speed, can select AUTO FAN, LOW, MID and HIGH.

5. Pressing button, to select the swing.

Guide for operation- Optional operation

1.Press SLEEP button, to set sleep.

2.Press TIMER ON and TIMER OFF button, can set the scheduled timer on or timer off.

3. Press LIGHT button, to control the on and off of the displaying part of the unit (This function may be not available for some units).

4. Press ENERGY SAVER button, can realize the ON and OFF of ENERGY SAVER function.

Introduction for special function

★About AUTO RUN

When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room temp. automatically to select the suitable running method and to make ambient comfortable.

★About lock

Press +and - buttons simultaneously to lock or unlock the keyboard. If the remote controller is locked, the icon will be displayed on it, in which case, press any button, the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.

11