Drain pan and drain hose must be installed before using reverse cycle models. Drain hose or tubing can be purchased locally to satisfy your particular needs.
Notes for installation
Remove
Before removing air conditioner to another place, you should contact the installer first.
Then it must be done under the direction of a licenced technician. In addition, the charge of this must be paid.
Noise
Install in a location that is firm enough to avoid the enlargement of noise and vibration.
Don’t put anything in front of the outlet of outdoor unit to avoid increasing noise.
Be sure that hot air or noise will not inconvenience neighbors.
Please contact the seller as soon as there is strange noise during operation. 
Please use the safety support.
Electric wiring
Must connect with ground reliably.
The exclusive circuit must be used. But removable socket can’t be used because poor contact of it can cause over heat or fire.
Don’t pull the power cord strongly.
In fixed circuit, there must be electricity leakage protection switch and leakage current is less than 30mA.
Connecting method between air conditioners and power cord and interconnecting method of each individual element with one another should accord with wiring diagram on the unit.
The air conditioner should be installed in accordance with national wiring regulation.
An
Air switch
If the supply cord is damaged,it must be replaced by the manufacturer or your dealer or a qualified person to avoid a hazard.
All The dectrical work must be done according to the local wiring regulations.
In case necessary, please consult your supply authority for system impedance information.
5 