INSTALLATION
MOTOR CONNECTION
•There are two types of motor connections where the main difference is the diameter of the steam and odour outlet:
-120mm diameter
-150mm diameter
•If the motor connection (N, Fig.1) does not come already fitted, it should be fastened to the top of the hood using screws provided. Then connect it to the steam and odour exhaust duct by means of a pipe of a suitable diameter.
CHIMNEY DUCT ASSEMBLY
•Take the two chimney ducts A and B (Fig.5) and rest the lower part of duct A on top of the hood.
•Fasten duct A to the hood using screws K (Fig.3), provided.
•Raise the mobile part B until it reaches the ceiling, making sure it is perpendicular with the hood.
•Fasten it with the screws M (Fig.5), provided.
Fig.4
Fig.5
GB |
| 6 |