CARE AND CLEANING
Before cleaning your cooker hood or carry out any maintenance, switch the omnipolar switch to OFF to disconnect the hood from the electricity supply.
CLEANING METAL GREASE FILTERS
The filters must be cleaned every 2 months of operation, or more frequently with heavy usage, and can be washed in a dishwasher.
•Remove the filters one at a time by pushing them towards the back and pulling down at the same time.
•Wash the filters, taking care not to bend them. Allow them to dry thoroughly before refitting.
•When refitting the filters, make sure that the handle is visible on the outside.
NOTE: After every 30 hours of use, the microprocessor which is the heart of the system, indicates with a flashing letter ‘A’ on the display that the metal grease filters should be cleaned. Cleaning the filters reduces the fire risk and improves the performance and efficiency of your cooker hood.
Clean the metal grease filters, following instructions in the ‘Care and Cleaning’ section.
After cleaning cancel the warning message as follows:
•Switch off the hood.
•Press and hold Key 2 for more than 5 seconds. When the key is pressed the letter ‘A’ will appear on the display, after the 5 seconds the letter disappears and the microprocessor starts a new 30 hour count down to the next warning message.
GB |
| 9 |
