Installation
! Please keep this instruction booklet in a safe place for |
future reference. If the appliance is sold, given away or |
moved, please make sure the booklet is also passed on to |
the new owners so that they may benefit from the advice |
contained within it. |
! Please read this instruction manual carefully: it contains |
important information concerning the safe operation, |
Ventilation |
To ensure adequate ventilation, the GB back panel of the cabinet must be removed. It is advisable to install
the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).
installation and maintenance of the appliance. |
Positioning
! Do not let children play with the packaging material; it |
should be disposed of in accordance with local separated |
waste collection standards (see Precautions and tips). |
! The appliance must be installed by a qualified professional |
. | 45 | mm. |
mm |
| |
560 |
|
|
min. 20 mm |
FAN ASSISTED |
MODE |
min. 45 mm |
in accordance with the instructions provided. Incorrect |
installation may damage property or cause harm to people |
or animals. |
Built-in appliances
Use an appropriate cabinet to ensure that the appliance operates properly:
•The panels adjacent to the oven must be made of heat- resistant material.
•Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.
•To install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:
|
|
|
|
| . |
|
|
|
| mm.23 | .min |
| |
|
|
| mm |
| mm. | |
|
|
| 547 | . | ||
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
| mm |
| |
|
|
|
| 45 |
|
|
595mm. |
|
| mm.576 | 558 | mm. | 593 |
|
|
| ||||
|
|
|
|
|
| |
| 595 |
| 5 mm. |
|
|
|
| mm. | . |
|
|
| |
|
| mm |
|
|
| |
|
|
| 545 |
|
|
|
|
| . |
|
|
|
|
|
| mm |
|
|
|
|
| 24 |
|
|
|
| |
!The appliance must not come into contact with electrical parts once it has been installed.
The indications for consumption given on the data plate
have been calculated for this type of installation.
Centring and fixing
Position the 4 tabs on the side of the oven so that they are lined up with the 4 holes on the outer frame. Adjust the tabs according to the thickness of the cabinet side panel, as shown below:
20 mm thick: take off the removable part of the tab (see diagram).;
18 mm thick: use the first groove, which has already been set in the factory (see diagram).
16 mm thick: use the second groove (see diagram).
Secure the appliance to the cabinet by opening the oven door and putting 4 screws into the 4 holes on the outer frame.
!All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.
Electrical connection
Ovens equipped with a
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
5
