Hotpoint RA720 Before You Begin, For Your Safety, Anti-Tipdevice, Completion time - 1 to 3 hours

Models: RA720 RA724

1 24
Download 24 pages 32.74 Kb
Page 13
Image 13
Installation Instructions

Installation Instructions

20and 24Compact

Electric Ranges

20″ and 24″ CompactQuestions? Call 800.GE.CARES (800.432.2737) or Visit our Website at:


Read these instructions completely and carefully.

IMPORTANT Save these

instructions for local inspector’s use.

IMPORTANT Observe all governing codes and ordinances.

Note to Installer – Be sure to leave these instructions with the Consumer.

Note to Consumer – Keep these instructions for future reference.

Skill level – Installation of this appliance requires basic mechanical skills.

Completion time – 1 to 3 hours

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not covered under the Warranty.

BEFORE YOU BEGINWARNING This appliance must be properly grounded.


Read these instructions completely and carefully.WARNING Before beginning the installation, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.


All rough-in and spacing dimensions must be met for safe use of your range. Electricity to the range can be disconnected at the outlet without moving the range if the outlet is in the preferred location (remove lower drawer).

To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by installing a range hood that sticks out at least 5” beyond the front of the cabinets. Cabinets installed above a cooktop must be no deeper than 13”.

Be sure your appliance is properly installed and grounded by a qualified technician.

Make sure the cabinets and wall coverings around the range can withstand the temperatures (up to 200°F) generated by the range.


•IMPORTANT — Save theseWARNING To reduce the risk of tipping, the appliance must be secured by properly installed Anti-Tip device packed with this appliance.

If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB2X7909.

•Completion time – 1 to 3 hoursWARNING

• All ranges can tip

Injury to persons could result

Install Anti-Tip device packed

with range

• See Installation Instructions

If you pull the range out and away from the wall for any reason, make sure the Anti-Tip device is engaged when the range is pushed back against the wall.


Page 13
Image 13
Hotpoint RA720, RA724 Before You Begin, For Your Safety, Anti-Tipdevice, Read these instructions completely and carefully