Campbell Hausfeld IN423200AV, EZ5000 Series specifications Important Safety Instructions

! WARNING

Operating Instructions & Parts Manual

General Safety (Cont.)

Caution indicates ! CAUTION a potentially haz-

ardous situation which, if not avoided, MAY result in minor or moderate injury.

NOTICE	Notice indicates
	important infor-

mation that, if not followed, may cause damage to the equipment.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS – To reduce the risk of fire or explosion, electrical shock and injury to per- sons, read and understand all instructions included in this manual. Be familiar with the controls and the proper usage of the equipment.

!DANGER

ELECTRICAL SHOCK HAZARD: To prevent electrical shock, observe the following guide- lines at all times:

GROUNDING INSTRUCTIONS

This product must be grounded. In the event of an electrical short cir- cuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances, as well as the National Electrical Code (NEC)

and, in the United States, the Occupational Safety and Health Act (OSHA).

Improper installa tion of the

grounding plug is liable to result in a risk of electric shock. When repair or replacement of the cord or plug is required, do not connect the grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green,with or without yellow stripes, is the grounding wire.

Check with a qualified electrician or serviceman when the grounding instructions are not completely understood, or when in doubt as to whether the product is properly grounded. Do not modify the plug provided; if it does not fit the out- let, have the proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-V circuit and has a grounding plug similar to the plug illustrated in Figure 1. Only connect the prod- uct to an outlet having the same configuration as the plug. Do not use an adapter with this product.

TESTRESET

Figure 1 - Grounded three-wire extension cord

	Table 1 – Extension Cords for 120V/15 Amp Unit
Length of Cord (ft.) 25-50			50<100	100<150	150<250	250<400	400-500
	Gauge of Cord	18	16	14	12	10	8

www.chpower.com2