Campbell Hausfeld IN423200AV, EZ5000 Series specifications Extension Cords

EZ5000 Series

General Safety (Cont.)

Extension Cords:

Use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that accepts the plug on the product. Make sure the extension cord is not damaged. When using an extension cord, be sure to use one heavy enough to carry the current the product draws. An undersized cord results in a drop in line voltage and loss of power and overheating. See Table 1 on Page 2.

Do not modify any of the electrical components of this equipment.

To reduce the ! WARNING risk of fire or

explosion:

• Do not spray flammable or com- bustible materials near an open flame or sources of ignition such as cigarettes, motors and electrical equipment.

• Paint or solvent flowing through the equipment is liable to result in static electricity. Static electricity creates a risk of fire or explosion in the presence of paint or solvent fumes. All parts of the spray sys- tem, including the pump, hose assembly, spray gun and objects in and around the spray area should be properly grounded to protect against static discharge and sparks. Use only conductive or grounded high-pressure airless paint sprayer hoses specified by the manufacturer.

• Verify that all containers and col- lection systems are grounded to prevent static discharge.

•Connect to a grounded outlet and use grounded extension cords. Do not use a 3 to 2 adapter.

•Do not use a paint or a solvent containing halogenated hydrocar- bons as this attacks the aluminum and increases the risk of bursting. Examples of improper solvents are methyl bromine, carbon tetrachlo- ride and ethyl iodide.

•Keep spray area well-ventilated. Keep a good supply of fresh air moving through the area. Keep pump assembly in a well-ventilat- ed area. Do not spray pump assembly.

•Do not smoke in the spray area.

•Do not operate light switches, engines, or similar spark-produc- ing products in the spray area.

•Keep area clean and free of paint or solvent containers, rags and other flammable materials.

•Know the contents of the paints and solvents being sprayed. Read all Material Safety Data Sheets (MSDS) and container labels pro- vided with the paints and sol- vents. Follow the paint and solvent manufacturer’s safety instructions.

•Fire extinguisher equipment shall be present and working.

•Due to flammability, use caution when using solvents with flash points less than 70F (21C) to clean equipment. Examples of accept- able cleaning solvents include water, mineral spirits and lacquer thinner. Unacceptable cleaning sol- vents include naphtha, MEK, ace- tone, alcohol and toluene.

3

www.chpower.com