ELECTRICAL FUNDAMENTALS
Warning, disconnect power before providing maintenance and service to unit.
Front Fan Access
The front fans supply air flow to the top of the front panel louvers. This air flow is to eliminate any condensation formed on the face of the curved glass.
•Fan/s are located behind the front panels.
•Turn off the main electrical power at main power switch if servicing fans.
•Remove the lower front panel.
•Remove screws from the lower flange at the base of the unit.
•Remove screws from the upper flange of the lower front panel, located behind the lower edge of the upper front panel.
•Remove the upper front panel.
•Remove screws from the lower flange of the plenum at the base of the unit.
•Remove screws from the front panel support brackets.
•Raise the front curved glass.
•From inside the case remove screws from the upper edge only of the deck support & glass stop.
•Pull entire assembly forward and care- fully set aside.
•Remove mounting screws from fan as- sembly to separate fan from shroud.
Bracket Screws
Lower Front Panel Screws |
| Plenum Screws |
|
|
|
Deck Support & Glass Stop Screws
R
888 Porter Rd. Muskegon, MI 49441 Phone: 231.798.8888 Fax: 231.798.4960 www.structuralconcepts.com
10
