ELECTRICAL FUNDAMENTALS
Warning, disconnect power before providing maintenance and service to unit.
Ballast Access/Removal
•Assembly or disassembly and servicing to be accomplished by licensed electrical contractor.
•Remove the rear grill by removing the six
screws located on both sides of the grill.
• Remove the control panel by removing the three remaining screws located on the right side of the panel.
• Release quick disconnect from wire har- ness.
•Remove two nuts from both end mounting flanges.
Electrical Box Access/Removal
•Assembly or disassembly and servicing to be accomplished by licensed electrical contractor.
•Remove the rear grill by removing the six screws located on both sides of the grill.
•Remove the control panel by removing the
three remaining screws located on the right side of the panel.
•Remove the electrical box by removing the four screws located inside and at the top of the box.
Evaporator Pan Access/Removal
Rear Grill
Control Panel
Ballasts
Elect. Box Screws
• Assembly or disassembly and servicing |
| |
to be accomplished by licensed electrical |
| |
contractor. |
| |
• Turn off main power and allow evaporator |
| |
pan to cool. |
| |
• Remove the rear grill by removing the six |
| |
screws located on both sides of the grill. |
| |
• Check temperature of pan prior to han- |
| |
dling. |
| |
• Withdraw evaporator pan from the right side |
| |
behind electrical box. |
| |
• Disconnect evaporator pan power cord from |
| |
receptacle at the pan. |
| |
• Empty evaporator pan contents into a suit- | Evaporator Pan | |
able container. | ||
|
R
888 Porter Rd. Muskegon, MI 49441 Phone: 231.798.8888 Fax: 231.798.4960 www.structuralconcepts.com
8
