If something

goes wrong...

Before calling a Service Engineer, please check through the following lists.

THERE MAY BE NOTHING WRONG.

GB

 

Problem

Check

 

 

 

(a) Check

 

If you find :-

 

Display is blank.

Nothing works.

Then it is likely that there is no electricity supply to your oven.

 

Check:

 

(i) That the main cooker wall switch is turned on.

 

(ii) Check other appliances to see if you have a power cut.

 

(iii) Check the main circuit breaker for the property.

 

 

Timer Display "0.00 AUTO"

The power supply to your oven has possibly been interrupted, but has now come

back on again. Reset the timer to the correct day and "Manual" operation using the

 

instructions given in the timer section of the book.

 

 

Main & Top Ovens do not

Check the following to ensure that the timer is in Manual Mode: Check that the Auto

work,

Symbol is not lit up and is not flashing. See timer section for instructions on how to

but the Grill works.

return timer to "Manual".

 

 

 

Operating the cooker under the following conditions may cause a safety device to

Top Ovens and Grill do not

operate.

(a) Grilling with the door closed - always grill with the door open to the correct

work, but the Main Oven

position - see grilling

works.

(b) Grilling for an excessively long period at maximum setting - see grilling guide.

 

 

(c) Grilling with inadequate ventilation in the cabinet - see installation instructions.

 

 

Grill keeps turning on and off

When the "Grill" control (A) is operating at less than MAX, the grill will cycle on and

off, this is normal and is not a fault.

 

 

 

Can not set an "Auto Cook"

Remember: "Cook Period" is the actual length of time for which, the timer will switch

programme

the oven(s) on as part of an "Auto Cooking" programme.

 

 

Draught from beneath control

A gentle flow of air will be blown from beneath the control panel when the appliance

is used. If the appliance is still warm, this cooling fan may run on, or restart itself after

panel.

all of the controls have been turned off. The fan will stop once the appliance has

 

been cooled. This is normal and not a fault.

 

 

Timer buzzer/bleeper operates

Press the minute minder button to silence the Buzzer/Bleeper.

continually

 

 

 

If you have been through the above list and there is still a problem, contact Service

29

Page 29
Image 29
Hotpoint BU82SS2, UQ47I2, UE47X2, BU72P2, AHP37X2, BU72K2, BU72B2 manual If something Goes wrong, There MAY be Nothing Wrong